English

SE-2011-01 Program testujący (przykład 7)

          
# NBOX HDTV client for ITI 5800S, ITI 5800SX, ITI 2850ST, ITI2849ST
# (c) SECURITY EXPLORATIONS    2011 poland

box> avinfo
Port[00] = HDMI_AUDIO
 - audio           = PCM
 - o-format.device = PCM-16
Port[01] = SPDIF
 - audio           = PCM
Port[02] = SCART
 - resolution      = 576i/PAL-BDGHI
 - video           = CVBS
 - macrovision     = 0
 - aspect-ratio    = 4:3
 - slow-blank      = 4:3
 - cgms            = CopyFreely
Port[03] = HDMI
 - connected       = 1
 - resolution      = 1920x1080i25/274M
 - video           = HDMI-RGB
 - hdcp            = 1 (TV is turned on)
   hdcp_state      : enabled
   hdcp_auth       : authorised
   hdcp_ksv        : XX:XX:XX:XX:XX:XX:XX:XX
 - hdcp_auth       = authorised
 - hdcp_state      = enabled
 - hdcp_ksv        = XX:XX:XX:XX:XX:XX:XX:XX
 - solution.device = 1680x1050p59.94/NATIVE
 - model-name      = SyncMaster
 - vendor-name     = SAM
 - serial-no       = 0
 - video.device    = HDMI-RGB
 - monitor-id      = 60931
 - manuf-date      = 06/2009
 - serial-no24     = 0
 - cec             = disabled
 - cec-sac         = disabled
box> hdcpinfo
 DrvVer: v3.1.8 Receiver info: Connected:1 HDCP capable:1 Repeater:0
  Enhanced capable:0 Capability:0x80 KSV:0xXXXXXXXXXX
Receiver status: Dev count: 0, Max devs: 0, Depth: 0, Max Cascase: 0
  HDMI mode: 0 (Bstatus:0000)
Transmiter info: KSV OK:1 [0xXXXXXXXXXX] Status:1
  IV_Key:0xXXXXXXXX 0xXXXXXXXX
Session info: Enc. enabled:1 Enhanced mode:0 Enhanced auth:0
  RN:0xXXXXXXXXXXXXXXXX TRI:0x3870 RRI:0x3870
  AuthCnt/Fails: 1/0 LinkFails: 0  I2cErrRd/Wr 15726/0 
          
                

Copyright 2008-2017 Security Explorations. All Rights Reserved.